Panasonic NPM-GW Pick and place machine
Panasonic NPM-GW Pick and place machine
Key features and functions
Support large components and large PCBs to meet the increasing demand for Electric Vehicles (EV) and DX
5M process control “APC-5M” for good production and stable operation
Various skill-less and manpower-saving features including Auto Setting Feeder
* 5M: The variable elements of a production site: huMan, Machine, Material, Method, and Measurement
Features
Modular mounter with wide range of components/PCBs compatibility
The basic performance of this modular mounter has been improved by renewing the core units, such as the placement head and recognition camera. It now supports a wide range of components and various components supply configurations, and can also handle larger PCBs. It also supports various automation and manpower-saving functions, including the Auto Setting Feeder (ASF), which automates the components supply operation, to flexibly meet the requirements of each mounting site.
Supported components range
Maximum speed and placement accuracy
Supported PCB size
Configuration example
Example configuration
Component supply units
Wide variety of components
High productivity mounting of a wide range of components Placement head (new design)
Flexible head configuration for 0201 to large and tall components. Production can be performed with high productivity. When compared with the catalog speed (CPH), the NPM-GW is approximately 10% better than our conventional model NPM-WX at ±25μm condition.
Large heavy BGA components
Large, heavy components placement
The nozzle is designed for large, heavy components, and scanning operations are tailored to the component size. And 15,000 BGA balls are detected, a trend in the server industry.
Automated DIMM connector placement
High load placement / Tall component mounting
High load placement of 100N is able to eliminate pin floating, and tall component mounting up to 53mm (including PCB thickness) allows automated DIMM connector placement. (*Please consult us for applicable components.)
Adaptable to various supply section layouts
Three types of supply section units
By combining three types of supply section units, you can select a variety of supply section layouts.
Wide range of PCB types and industries
Supported PCB sizes
The number of PCB sizes supported has been expanded from previous models to accommodate a wider range of PCB types, satisfying the needs of customers in a number of industries.
Support for large PCBs
When the transfer direction dimension (L) exceeds 760 mm, the supported PCB size can be expanded up to 1,050 mm. When equipped with a front/rear extension conveyor, it can be expanded up to 1,260 mm.
High quality placement
Unit condition monitoring~analysis to optimize maintenance APC-5M (option)
To ontrol 5M variation autonomously, unit condition can be monitored, analyzed easily to ensure proper maintenance.
5M Unit conditions are monitored in real time to control variations autonomously, enabling predictive maintenance before conditions deteriorate and preventing errors due to lack of maintenance.
Not only showing the status of each equipment, but also the entire line can be displayed on the LPC (Line Process Controller) screen for line status monitoring, and the status of target units in the line can be broken down for time-series analysis. The status after maintenance can also be checked to determine if maintenance is appropriate.
※5M : huMan, Machine, Material, Method, Measurement
| SKU | NM-EJM2F |
| Model ID | NPM-GW |
| Model No. | NM-EJM2F |
| PCB Dimensions (mm) | Single conveyor: |
| Batch mounting ：L 50 mm × W 50 mm to L 760 mm × W 687 mm | |
| 2 position mounting ： L 50 mm × W 50 mm to L 360 mm × W 687 mm | |
| Dual conveyor: | |
| Please refer to the specification booklet for details* | |
| Electric Source | 3-phase AC 200、220、380、400、420、480 V 2.5 kVA |
| Pneumatic Source | Min.0.5 MPa、200 L / min ( A.N.R. ) [*1] |
| Dimensions (mm) [*2] | W 1 410 mm × D 2 320 mm × H 1 444 mm[*3] / W 1 410 mm × D 2 468 mm × H 1 444 mm[*4] |
| Mass | 2 810 kg [*3] / 2 840 kg [*4] |
1. Only for main body
2. Excluding the monitor and signal tower
3. Machine dimensions and mass for standard configuration ( NPM-GW and ASF cart ( 60-slot ) × 2 or cart ( 34-slot ) × 4 ).They differ depending on the optional configuration.
4. Dimensions and mass of the machine and two ITF carts ( 30-slot ).
SMT Pick and place machine Brand
provide a full SMT assembly line solutions, including SMT Production Line, SMT Pick and place machine, SMT Stencil Printer, SMT Inspection equipment, SMT Weling equipment, SMT Intelligent Storage System, SMT Automatic Insertion Machine, SMT Peripheral Equipment, SMT Feeders, SMT Nozzles, SMT Spare Parts etc any kind SMT machines you may need, please contact us for more information:
I.T.T Technology Co.,Ltd
Manager ：David
WeChat: +8613316935262
Email: sales01@smt-yfx.com
We are committed to producing the best quality products at the most competitive prices. Therefore, we sincerely invite all interested companies to contact us for more information.