A. Multi-temperature zone design, more temperature control points, to meet the requirements of different temperature curves

B. Effectively eliminate voids, the total void area can be controlled below 1%

C. Efficient production capacity, the average production cycle is 30~60 seconds

D. High-efficiency oil-free vacuum pump unit for shortest depressurization time

E. Efficient flux recovery system to prevent flux residues



Key Features
Highest Yield Reflow Oven!

Lowest Delta T on the board

Lowest Nitrogen & Electrical Usage!

Maintenance Free!

VOID Free Reflow Oven – with Vacuum option

Industry 4.0 Compatibility

Integrated Cpk software at No Charge!

JUKI RS-1R pick and place machine, JUKI RX-8 pick and place machine,SMT pick and place machine, JUKI Pick and place Machine, Samsung Pick and Place Machine, Yamaha Pick and Place Machine, Panasonic Pick and Place Machine, FUJI Pick and Place Machine, Siemens Pick and Place Machine.

Applicability to odd-shaped parts is reinforced.

Equipped with a head with one gantry and six spindles

Placement accuracy correction system(head offset,C/V offset etc.)

Applicable to Max.740(L)x460(W)(Option)PCBs for long boards applied to LEDS and displays."

As a general component placer whose vision system is reinforced based on the platform of the SM471 high speed chip shooter and whose chip placement speed is the highest among the same class component placers, the SM481 realized achip placement speed of 40,000 CPH, the highest among the same class component placers, by applying a head with one gantry and ten spindles as well as new flying vision and by maximizing the pickup and placement motion.

Hanwha SM471 Plus Pick and Place Machine,Component Range:0402 above, Patch speed 78,000 CPH,2 Gantry x 10 Spindles/Head, weight 1820KG

Component Range: 0402(01005

Patch speed 78,000 CPH

2 Gantry x 10 Spindles/Head

Weight 1820KG

Enhance the convenience of device software management. Built-in * optimized software in the device, which can realize simple program creation / editing. Provides various job information through a large LCD screen. Highly convenient high-precision electric feeder

The NPM-TT2 (Next Production Modular-Twin Tray II) platform represents the next generation in twin tray modular production from Panasonic’s award-winning NPM platform—ideal for any mix.
Further bolstering the SMT process to accommodate more tray-supplied parts in full independently-run-lane mode, the NPM-TT2 processes boards up to 510 x 590mm and its dual lane functionality allows assembly of more of one product or two different products at the same time.

Used-hawha 2018year Sm471 Plus Smd Pick And Place Machine

Our warehouse has a lot of stock, Samsung machine 431/421/411/321/cp45 and Hanwha SM471/481/482/S1/s2/L2/hm520 machine

Samsung Hanwha full-model patch machine sales

All Hanwha new and used chip mounters are fully stocked and sold off the shelf