Domestic Original Manufacturer Direct Sales Single Rail Aoi Optical Detector Smt Furnace Pcba

Functional Specifications: ALD8710S, ALD8710D, ALD8730S, ALD8730D
Circuits to be inspected: Circuit boards before and after the SMT reflow oven - Zhongguo Vision Test Boardc flow and after-reflow PCB ins|
Detection method: 3D shape deep learning, TOC, Match, Short, IC, OCR Test Metho 3D shapein deeUeaocineH
The system incorporates multiple internationally advanced algorithms such as HLEINING, MENYLEACYNG, and ONG LOCATION. It automatically sets the parameters for each detection point based on different conditions. ent test aots
allycet nar s according to diffel
Camera
Super high speed intelligent digitalindustrial camera+Telecentric lens
Ultra-high-speed intelligent digital industrial camera + telephoto lens 3D AOI comar
Standard Configuration: 14um / Pixe, FOV: 56.00mm x 42.00mm, Detection Time (Speed) < 600ms / FOV
Resolution / Visual Range / Speed
Optional Configuration: 10um / Pixel, FOV: 40.00mm x 30.00mm, Detection Time (Speed) < 600ms / FOV
Resolution / Ranges / Speed (Detection Time (Speed) < 600ms / FOV)
Optional Configuration: 7um / Pixel, FOV: 28.00mm x 21.00mm
Light Reception 3D color LED light source
3D彩色 LED 光源 + 数字编码 LFD 光源 digital encoding LED light sourc
Programming mode
ing Mode Gerber,CAD in
Gerber
CAD data import automatically corresponds to the component library onent library Rn
ally corresI
Within the local area network, remote operations can be carried out via the TCP/IP network, including viewing, starting or stopping the machine's operation, modifying programs, and other operations. Remote Contro Remote Control through TCP/lP. Check, start or stop the machine,or modify the procedures at any time
Detect and cover defects, deviations, skewing, standing blocks, side-standing, overturned pieces, wrong pieces, damaged pieces, reversed orientation, component height measurement, warping, excessive soldering, insufficient soldering, short circuits, etc. in terms of appearance quality. Poo
*reppereanclke
ke mis
neneneiealionn
ment,skey
aved bilboerd mounting en side overturne
wrongpante
Special functions: Automatic program loading function, multi-board multi-program detection function, and front and back program detection function. SpE ial Eeature Supporta ograms tes 3
SPC and process control: All test data are recorded throughout the process and analyzed. Within the local network, production status and quality analysis can be viewed through remote control or remote monitoring. Reports in formats such as Excel and Word can be generated. SPC and program contro and guality analysis by remote control or remote mon oring in theLaN E .Txt.etc. can be.outol
Barcode system Automatic barcode recognition (1D or 2D codes) QLeadler Barcode Systen Auto read barcode(1 or 2 dimensior
Server mode: Utilizes a central data server to centrally manage and uniformly control multiple AOI data sets. Server Mod Administrativ
tive datafrom manv AOl through center serve
Operating System: Windows 10 Opera tion Syster
Test result output: Liquid Crystal Display Display/Outpu
System parameters System Specifications All esder
PCB size range: 50x50mm (Minimum) to 450x710mm (Maximum)
50x50mm (Minimum) to 650x710mm (Maximum) (Two-stage: 620x710mm) xeW)uu0EEx0S~(u! W)uuOgx0S
(Two-stage: 820x700mm
1st track is fixed. 2nd, 3rd, and 4th tracks are adjustable. The minimum size between 2nd and 3rd tracks is 50mm. The maximum length of 1st track is 710mm. Dual-track equipment
When using equipment with dual tracks: The maximum width of both tracks is 330mm (testable width) between 2 and 3 is 50mm; The Max. size b
kimum wiatb ofthetracksare33baa wiath istestablel
tween 1and 4 is 710n
maximum widt of thetrackis 600mm 094
Dual Track: Both the m:
The thickness range of PCB is 0.2 to 5 mm. PCB Thickne
The clearance between the edges of the PCB assembly TOP. 3 mm Bottom.3 mm
ping System Edge Clearanc
The largest PCB (Printed Circuit Board) five points num PCB Weiqh
CB curved bed < 5mm or 2% of the PCB diagonal length
40mm for PCB bottom
< 5mm or 2% of the PCB diagonal length for PCB top and bottom clearance
PCB top: 40mm, PCB bottom: 50mm, PCB top: 40mm, PCB bottom: 50mm, PCB top: 40mm, PCB bottom: 40mm Top Side: 40 mm Bottom Side: 50mm :40 mm
Conveyor system: Bottom-up fixed, automatically compensates for PCB bending deformation
WW O.epIS do1T: Automatically feeds and removes boards, flat belt, automatically adjusts width. S£woo8uwot:P! S£dol£ww0g:sP! S£woo8£uwot:ap! S£doL£uw0t:aP! S£uo1O8
Conveyor Systen Botton
h-up fix sd,Autd d distortion, auto-load and unload, flat belt, adjust th
width automaticalI
Conveyor's height from the ground: Io^e o uo! }esuaduo0 O! Heu
870 to 970mnm Conveyor Heigh
ConveYo flow direction: The "OK" button can be set as left-right-right-left. The factory setting is left→right-right→left. The "OK" button can also be set as left→right and right→left. The factory setting is left-right-right-left. Set£on£buton£as£leftrightor£rightlert Set on button as left-right or right-left Set originally as Teftright or rightleff
XY platform driven by the screw rod and AC servo motor drives the PCE fixed at 919! o! A9seMew6jJo=8s
PRAamera moves in the XY direction, through CTQil approved with CTQ
Power Supply
AC 230V 50/60Hz, 1.8KVA .8KVA
Air pressure: 04 - 08 M03
Front and rear equipment communication mmunicatior
Smem
The equipment weighs approximately 980KG, approximately 1050KC, and approximately 1050K0. H1050K
Approximately 1100 kilograms
About 1100KC Ab0ut 1050Kc
The dimensions of the equipment are 1000x1540. 1000x1540x16101
x1610Wm (L x H) Does not include the height of the signal tower leight of signal ligh
1200x1540x1610mm (Length x Width x Height) - excluding the height of the signal lights 1200x1540x16
10(LxWxH) not incluc
ding height of signal light Dimens
Environmental temperature and humidity: 10 - 35℃
35% 80% RH (no condensation ALD87 series) Humidit 10~35℃ ~80% RH(no dew
Equipment safety regulations comply with CE safety standards. Certificat Accordina with CE standarc
Note: The above parameters are the standard configuration. If there are any special requirements, the technical parameters can be improved and customized according to the customer's request. If there are any changes, they will be based on the highest requirements.
Sorry for not giving further notice. The machine appearance is for reference only and is subject to the actual product.
The final interpretation right belongs to ALeader. For more details, please call the service hotline or send an email.