Semi-auto Desktop Pcb Dip Soldering Machine For Plug-in Components Soldering

Semi-automatic dip welding machine is a new circuit board welding production equipment derived from tin furnace and wave soldering in recent years.

Similar in function to wave soldering, with spraying, preheating, welding, cooling and other functions; The welding method is similar to the manual dip welding of the tin furnace, but the difference is that the robot is used to tighten the circuit board; Take the legend on the right for reference.

use

Suitable for long insert, short insert components and single-sided circuit board, double-sided circuit board or multi-layer circuit board solder.

Suitable for different substrate, flux, solder and different production needs, the solder joint is full, smooth, reliable, less virtual welding.

The solder quality is as full, smooth and reliable as wave soldering, with no virtual welding, tin bridge and good anti-seismic and anti-cracking performance of solder joints.

The dip welding machine can be connected to the manual or automatic line, and the soldering time is only 12 seconds, and the welding time can be 960-6720 pieces in eight hours.

With the flux closed automatic level control system, to ensure that the sprayer spray effect is good, to avoid the similar models of frequent manual replenishment of the cumbersome.

With the high-density micro-porous flux spray module, it can adapt to the use of various performance flux, thin and uniform coating, and less dosage.

Spray can be controlled by button or foot switch to adapt to different operating habits, convenient and practical.

Efficient preheating and drying, accelerate the volatilization and molecular activation of circuit board flux, and give full play to the performance of flux.

Temperature is intelligently controlled by microcomputer PID temperature controller, real-time display of set temperature and actual temperature, temperature control range: normal temperature -600℃, high precision, intelligent temperature correction and so on.

Unloading and cooling is completed once, and the cooling area is forced to cool by the superstatic fan.

The interior is equipped with exhaust device, which can effectively eliminate harmful gases produced in the welding process.

It is equipped with tin slag collection tank, which is convenient and clean, and can also recover tin slag for secondary reduction and save cost.

Make full use of the internal space of the machine, with two large capacity tool cabinets, practical and convenient.

A full set of equipment installation, commissioning, maintenance is simple, only one person to operate.