The number one fully automated online SPI
S8080 Inline Solder Paste Inspection Machine

1.Programmable Spatial Light Modulation
The original PSLM can emulate the cycle of the grating by using software.This method greatly improves the accuracy and scope of application by abolishing the mechanical drive and transmission parts, avoiding mechanical wear and maintenance expenses.
2.Phase Measurement Profilometry
Through the phase modulation of full shade, we can provide a high detection resolution (0.37um), 4-8 times sampling ensures high repeatability. Perfect detection performances can be reached with high precision screw and guide rail.
3.3D Diffuse Lighting
Using of synchronization structure light perfectly solves the shaded affect in solder paste inspection. Using a dimensional RGB light source in combination with high contrast we are able to perfectly work with any substrate. This includes black substrates, ceramic substrates, and also 2D/3D color images of the paste.
4.Active RGB 2D

The MS-11 series uses 3D to check printing The status of solder paste,accurate analysis of adverse phenomena and causes in the production to help improve production quality. process,Moreover, an affordable 3D SPI that can detect 0201mm solder pads is installed with 25 megapixel main phaser.


Two sets of molar light emitters

2500/1500/4 megapixel main camera

CoaXPress High Performance Transmission System

Bending does not affect testing

Integrated Quality Management System

Koh Young ZENITH Alpha 3D AOI

Specifications:





Koh Young ZENITH Alpha 3D AOI


The World's Best-selling & First Full 3D Automated Optical Inspection
· Eliminates all the sources of defects using full 3D measuring inspection equipment skills- Removes shadow problems utilizing 8-way projection- Realizes perfect 3D solder joint inspection- Provides accurate inspection data with real-time PCB warp compensation· Full 3D data-based process optimization solution: Realization of industry 4.0 smart factory- Process information DB and real-time remote monitoring- Inspection program management automation & efficiency· Optimized specification model for a variety of production environment
High-precision weld seam measurement algorithm provided by KOH YOUNG technology for artificial intelligence


Solution to Shadow Problem

Moore's article technique for eliminating shadows&

Four directional projection light system (Zenith Alpha HS&Zenith Alpha UHS)/

Five directional projection light system (

NEW PEMTRON ATHNEA 3D AOI KOREA

SUNEAST Suneast Intelligent Equipment Technology(Shenzhen) Co.Ltd

E-FLOW wave soldering specifications

brand
Mirtec
Focus Distance
45mm
dimension
1080*1470*1560mmm(Length, width and height)
Field of view
54*50mm
power
1.1 KWkW
weight
About 950 kg
Power source
220V
illuminant
8 segments of coaxial lighting
noise
50 db
colour
white
Resolution
10/15 microns
Operating voltage
220V
Import or not
is
Processing customization
is
Effective pixel
15 million /25 million million
Country of origin
Import from Korea
Saleable land
The whole country
use
Test the SMT welding effect of PCBA with patch welding
Model number
MV-6e OMNI

【 Parameter Description 】
TROI Series - Solder paste testing equipment
Pentron three-dimensional solder paste detection equipment using moire image,
Instead of using only color images for solder paste detection,
It is a combination of 2D color images and 3D detection data to provide more detailed and realistic 3D detection images.
At the same time to provide users with rapid and accurate quantification, good and bad product judgment required information,
At the same time, it is equipped with a variety of statistical software to provide the best solution for the production of high-quality and high-precision PCB.
【 Product Introduction 】
PEMTRON 3D SPI TROI 7700 SERIES
3D Inline Solder Paste Inspection System
TROI Series - solder paste testing equipment
​​​​PEMTRON 3D SPI TROI 7700 SERIES
The most reliable quality assurance solution
Compared to other SPIs, PEMTRON SPI has demonstrated high precision and repeatability through its superior optical system.

PARMI Online 3D AOI Xceed - New Generation Performance Description:

Screen snapshot 2020-12-11 PM 6.36.36.png



1:3D AOI Laser Head (TRSC-I)

1-1. Dual laser light source projection technology, high resolution CMOS lens with 4 million pixels.

1-2.RGBW LED light source.

1-3. Telecentric lens.

1-4. Ultra-lightweight laser, compact design.

1-5. High detection speed in the industry: 65cm2/ sec@14 x 14umm.

1-6. Detection time (including the time of entering and leaving the board) : The detection time based on PCB 260mm(L) X 200mm(W) is 10 seconds.

3D-AOI- Laser head.jpg





2: PARMI online 3D AOI

The 3-dimensional test data can ensure the degree of detection and overcome false defects.

PARMI online 3D-AOI inspection effect.jpg



3: The whole test is not affected by PCB material, surface and color

Different PCB material detection effect.jpg



4: Real 3D Image

The signal processing technology shows a true and clear 3D image without any noise.

3D test effect.jpg



PARMI online

PARMI SPI
Product name: Online 3D SPI

Product model: SigmaX

Machine brand: PARMI

Machine origin: South Korea

Product category: SMT equipment

Model: NDT-X3500 (A, B, C)
NDT3500A--100KV light tube
NDT3500B--130KV light tube
Size: 1160*1090*1857 mm
Weight: 1100KG
Power supply: single-phase 110~230V/50~60Hz
Optical tube type: Closed
Focal Spot: 5 um
Panoramic range: plus or minus 60 degree tilt
X-ray output voltage: 90~130 KV
Magnification: 120 (geometry) /1200 (system)
Camera lens specifications: Image intensifier + digital CCD 25 frames/m
CCD pixels: 1.3 million
System image resolution: 110 LP/CM (light pair per cm)
Image area: 600 x 415 mm
Performance: Leakage

Measuring range
3072*3072pixels
Resolution
1500 * 1500
unfold
This equipment is mainly used for the SMT industry production of Reel materials for quick counting, with a high degree of industry 4.0 as the standard, intelligent modular design, 7-17 inch Tape Reel/JEDEC Tray/IC tide sensitive bag and other whole items of materials, equipped with artificial intelligence deep learning software, cloud update system.
Material types include all resistance-capacitance materials and IC materials. X-ray imaging technology is used to detect production materials and obtain image information. The actual quantity of materials can be obtained by fast counting through the image algorithm independently developed by SEAMARK Company. Meanwhile, the number of materials can be classified and counted according to categories, and the equipment data information can be connected with the customer's MES system.
X-RAY point machine measurement results

Sequence category Pan Size Quantity accuracy cycle time
1 010

Low Cost Off Line Smt Saki Bf-comet10 Aoi Machine For Pcb Led Smt Assembly Line