SMT reflow oven Heller 1809 MKIII reflow
A. Multi-temperature zone design, more temperature control points, to meet the requirements of different temperature curves
B. Effectively eliminate voids, the total void area can be controlled below 1%
C. Efficient production capacity, the average production cycle is 30~60 seconds
D. High-efficiency oil-free vacuum pump unit for shortest depressurization time
E. Efficient flux recovery system to prevent flux residues
Key Features Highest Yield Reflow Oven!
Lowest Delta T on the board
Lowest Nitrogen & Electrical Usage!
Maintenance Free!
VOID Free Reflow Oven – with Vacuum option
Industry 4.0 Compatibility
Integrated Cpk software at No Charge!
B. Effectively eliminate voids, the total void area can be controlled below 1%
C. Efficient production capacity, the average production cycle is 30~60 seconds
D. High-efficiency oil-free vacuum pump unit for shortest depressurization time
E. Efficient flux recovery system to prevent flux residues
Key Features Highest Yield Reflow Oven!
Lowest Delta T on the board
Lowest Nitrogen & Electrical Usage!
Maintenance Free!
VOID Free Reflow Oven – with Vacuum option
Industry 4.0 Compatibility
Integrated Cpk software at No Charge!
5.0
design customization
Please fill out the form below to request a quote or to request more information about us. Please be sure to upload customized requirement documents or pictures, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
Please fill out the form below to request a quote or to request more information about us. please be as detailed as possible in your message, and we will get back to you as soon as possible with a response. we're ready to start working on your new project, contact us now to get started.
| HELLER1809MKIII reflow soldering furnace specification parameters | |
| Power input (3-phase) standard | 480 volts |
| Circuit breaker size | 100amps @ 480v |
| KW | 8.5-10.5 continuous |
| Typical operating current | 20-25amps@480v |
| Optional power input available | 208/240/380/400/440/415 VAC |
| Frequency | 50/60 Hz |
| Continuous Area Opening | Standard |
| Single phase operation | unavailable |
| Equipment size | L4650 x W1370 x H1600 (mm) |
| Net weight | 1588kg |
| AMD or Intel computers | standard |
| Formula storage | :>500 |
| Flat screen display | standard |
| Windows operating system | Windows XP ® |
| PCB width | 20 centimeters (50.8 centimeters) |
| Space required between PCBs | 0.0 centimeters |
| Conveyor length loading | 18 centimeters (46 centimeters) |
| Conveyor length unloading | 18 centimeters (46 centimeters) |
| Heating tunnel length | 105 centimeters (254 centimeters) |
| Process gap above the mesh belt | 2.3 cm (5.8 cm) |
| Mesh belt spacing | 0.5 cm (1.27 cm) |
| Conveying speed | 74cm/Min (188 cm/min.) |
| Conveyor direction from left to right | standard |
| Belt direction from right to left | optional |
| Conveyor speed control type | closed-loop |
| From floor height - standard | 37.0 cm ± 2.0 cm (94 cm ± 5 cm) |
| Floor height - optional | 32.6cm+3.9cm/-. 4cm (83cm+10cm/-1cm) |
| Gap above conveyor belt | 1.15 cm (2.9 cm) |
| Gap below the conveyor belt | 1.15 cm (2.9 cm) |
| PCB support foot length | :. 187 cm (4.75 mm) |
| 3mm long support pin | optional |
| Min/Max board width | 2.0cm -18cm (5-45.7cm) |
| Edge holding track heater | No need |
| Power width adjustment | standard |
| Computer controlled width adjustment | optional |
| Automatic lubrication system | standard |
| Heater type | Instant response open coil |
| Heater material | nickel chromium alloy |
| Infrared panel heater (for curing) | optional |
| Temperature controller accuracy | ±. 1 ° C |
| Cross band temperature tolerance | ± 3.0 ° C |
| Heating power per zone | 6000 watts |
| Temperature range standard | 25-350 ° C |
| High temperature up to 400 ° C | optional |
| High temperature up to 450 ° C | optional |
| Insulation type | calcium silicate |
| UV curing | optional |
| Standard for the number of cooling zones | 2- (3 optional) |
| Additional cooling area (external) | optional |
{{item.score}} Stars
{{item.pre}}%
{{item.nickname ? (item.nickname.slice(0, 2) + '*****') : item.source === 1 ? 'mall buyer' : '--'}}
{{item.comment_time}} Review in the {{item.country}}
{{itemAttr.params_key}}: {{itemAttr.params_value}}
Get in touch with us
We are committed to producing the best quality products at the most competitive prices. Therefore, we sincerely invite all interested companies to contact us for more information.
Related Products
Contact person: Nancy
Phone: 0086-13235536784
Email: nancy@smt-yfx.com
WhatsApp: 0086-13235536784
Address: No 108 Fuyuan Street, Fenghuang Community, Fuyong Street, Baoan District, Shenzhen
Copyright © 2026 Shenzhen Yufuxin Technology Co, Ltd - www.smt-warehouse.com | Sitemap | Privacy Policy